Sick Penang distributor, Safety

Flexible integration with cascadable safety solutions
The M2000 Cascadable multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. With the M2000 Cascadable, up to three devices can be connected in a cascadable system.

Integrated RES and EDM functions for enhanced access protection
The M2000 RES/EDM multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. The integrated restart interlock (RES) provides shorter cable runs and reduced commissioning times.

Protection using intelligent wiring and integrated functions
The M2000 RES/EDM A/P multiple light beam safety device is an ideal solution for simple access protection. Similar to the M2000 A/P Standard, this safety device is particularly economical since only the active side must be wired, which reduces the required installation considerably.

Economical solution for one-sided or multi-sided protection
The M2000 Standard multiple light beam safety device is an economical solution for one-sided or multi-sided access protection. High scanning ranges and high signal reserves open a wide range of application possibilities, even under harsh ambient conditions.

Evaluation unit for L4000 Systems single-beam photoelectric safety switches
The UE401 evaluation unit safely and reliably evaluates the signals of the L4000 Systems single-beam photoelectric safety switches. It can also be used to execute the restart interlock and external device monitoring (EDM) functions.

Intelligent wiring and maximum availability
The M4000 Standard A/P multiple light beam safety device is the economical solution for access protection. It is particularly economical since only the active side must be wired, which reduces the installation time.

Flexible machine safeguarding for type 2 applications
The L25 and L26 product families from SICK represent a new generation of single-beam photoelectric safety switch for type 2 applications, which, in combination with an external test device, facilitate operations and make processes safer and more efficient.

Muting switching amplifier for M4000 Advanced
Together with the M4000 Advanced multiple light beam safety device, the UE403 muting switching amplifier forms an efficient solution for remote, conventional muting applications with automated material transport.

Flexible machine safeguarding for type 2 applications
The L25 and L26 product families from SICK represent a new generation of single-beam photoelectric safety switch for type 2 applications, which, in combination with an external test device, facilitate operations and make processes safer and more efficient.

More efficiency with safety
The deTem multiple light beam safety devices offer high flexibility and efficiency for access protection as well as for entry and exit monitoring with muting. The deTem features a compact housing and stands out not only due to its smart functions, but also thanks to its innovative diagnostic options.

Safety-related sensors for mobile and stationary applications
To offer customers a complete, scalable 2D LiDAR sensor portfolio, SICK is supplementing the TiM series to include safety-related sensors which satisfy performance level b: TiM-S devices.

Proven and compact safety laser scanner with measurement data output
The S300 safety laser scanner is suitable for horizontal and vertical hazardous area protection. For quick and easy commissioning, the device is configured using the PC-based CDS software.

The safety laser scanner for outdoor automation
The outdoorScan3 safety laser scanner protects people outdoors in a wide range of mobile and stationary applications. Thanks to intelligent algorithms and the outdoor safeHDDM® scanning technology, the sensor achieves high productivity even in unfavorable weather conditions.

Safety distance sensors for various applications
With the DT35-S, SICK is offering a safety distance sensor for the protection of persons and capital goods up to performance level b.

Safety sensor for muting and fall edge detection up to SIL 1 and PL c
The WTT12-S safety sensor is well-suited for simple reliable detection of objects in mobile and stationary applications. The sensor reliable detects fall edges by means of optical time-of-flight measurement.

Comprehensive configuration software for the safety controller from SICK
The free Flexi Soft Designer configuration software allows for clear and simple configuration for the Flexi Soft safety controller.

Intuitive configuration software for safety products from SICK
Intuitive project planning of SICK safety sensors and safety controllers is carried out using the free Safety Designer configuration software. With the software, you simply select hardware components and link logic functions.

Safety under control – compact, easy and efficient
The Flexi Compact safety controller is based on a future-proof technology platform and can be programmed via software. Thanks to its modularity, it can be optimally configured for a wide range of application requirements and its compact construction means it can be installed in tight spaces.

Safe 3D environment perception opens up new dimensions
With the world’s first 3D time-of-flight camera with performance level c safety certification, SICK is opening a new dimension in safety technology.

Reliable emergency stop pushbutton with optional reset pushbutton
ES11 emergency stop pushbuttons are essential in automated machines and plants. They make it possible for someone to stop a machine or a system immediately in case of an emergency. Depending on the variant, the emergency stop pushbuttons are also equipped with reset pushbuttons.

Small RFID safety switch for door monitoring with manipulation protection
The STR1 RFID safety switch has monitored semiconductor outputs (OSSDs) and can be safely connected either individually or in series.
It can be used for applications where a high level of manipulation protection is required. The STR1 is available with three codes.

Compact electro-mechanical safety position switch with turning lever
Safety position switches are used for reliably identifying dangerous movements, even at high speeds. The i10R safety position switch has a small, standardized plastic housing and a turning lever with a plastic roller.

Compact electro-mechanical safety switch with retaining force for doors
Safety switches with a separate actuator are made up of two parts: a safety switch that is mounted on the fixed part and an actuator that is mounted on the mobile part of the guard. When the guard is closed, the actuator is moved into the safety switch.

Rugged electro-mechanical safety switch with retaining force for doors
Safety switches with a separate actuator are made up of two parts: a safety switch that is mounted on the fixed part and an actuator that is mounted on the mobile part of the guard. When the guard is closed, the actuator is moved into the safety switch.

Compact electro-mechanical safety locking device with door monitoring
The i15 Lock safety locking device is used for keeping protective devices safely locked until a hazardous area can be entered. This safety switch is the smallest in the product family of safety locking devices.

Rugged, ensures reliability under extreme ambient conditions
The WSU/WEU26-3 photoelectric safety switch is used for access protection for hazardous areas on machines or systems. It has a self-testing sender and receiver.

Universal use up to type 4 with safe control solutions from SICK
The L41 single-beam photoelectric safety switch consists of a sender and a receiver. The test input of the sender supports direct functional testing.

Complete system that is highly reliable and offers fast response times
The L4000 system consists of the UE401 safety evaluation device and photoelectric safety switches. The UE401 safety evaluation device functions as the link between the photoelectric safety switches and the machine controller.

Small type for optimum integration into safety applications up to type 2
The L29 single-beam photoelectric safety switch consists of a sender and receiver. The test input of the sender allows direct functional tests. Performance level PL c in acc. with EN ISO 13849-1 or Type 2 in acc.

Cylindrical design for safety applications up to type 2
The L21 single-beam photoelectric safety switch consists of a sender and receiver. The test input on the sender allows direct functional tests. Performance level PL c in acc. with EN ISO 13849-1 or Type 2 in acc.