Puls Distributor
Selected tag
Tag Selection
- Puls Distributor (118)
- Puls Penang Power Supply (177)
- 1 phase Din Rail Power Supply (114)
- CS5 Power Supply (4)
- DIN rail power supplies for 1-phase system (59)
- Din Rail Power Supplies (47)
- Penang Power Supply (114)
- Puls (70)
- ML50 Power Supply (12)
- Puls Power Supply Distributor (6)
- ML100 Power Supply (10)
- PIC480 Power Supply (4)
- 1 Phase Power Supply (71)
- QS10 Power Supply (16)
- power supply (63)
- FPS300 POWER SUPPLY (15)
- 1 phase IP54-67 power supply (8)
- CP10 Power Supply (15)
- Power supply with integrated decoupling function (17)
- CP20 Power Supply (12)
- Puls Power Supplies (22)
- Puls Power Supply (40)
- 3 Phase Power Supply (12)
- CT10 Power Supply (3)
- 3-phase DIN rail power supplies (10)
- 3 Phase Power Supplies (6)
- QT20 Power Supply (4)
- XT40 Power Supply (7)
- DIN rail power supplies for 3-phase system (19)
- FPT500 Power Supply (16)
- 3-phase IP54-67 power supply (12)
- 3 Phase IP54-67 Power Supply (7)
- CP5 Power Supply (9)
- DC/DC Converters (67)
- CS3 Power Supply (2)
- ML15 Power Supply (6)
- ML30 Power Supply (9)
- ML30.100 Power Supply (3)
- ML95 Power Supply (2)
- QS5 Power Supply (4)
- QS20 Power Supply (13)
- DeviceNet power supply (4)
- Field power supplies (18)
- 1-phase IP54-67 power supply (5)
- 1-phase IP54-67 power supply with highline input voltage (4)
- FPH500 Power Supply (4)
- FPT300 Power Supply (2)
- Buffer modules (4)
- Buffer module (4)
- SLV20 Power Supply (1)
- UF20 Power Supply (2)
- UF40 Power Supply (1)
- DC-UPS (9)
- DC-UPS for built-in battery (2)
- UBC10 Power Supply (2)
- DC-UPS with capacitor storage (2)
- UC10 Power Supply (2)
- DC-UPS control unit (5)
- UB10 Power Supply (3)
- Supplementary Unit (9)
- UB20 Supplementary unit (1)
- UB40 Power Supply (1)
- Electronic circuit breakers (16)
- Electronic circuit breaker (13)
- Puls Supplementary Unit (16)
- PISA 11 (2)
- Electrical interconnection rail (6)
- BUS-BAR1-L155 (1)
- BUS Supplementary Unit (2)
- Redundancy modules (22)
- CP10 Supplementary unit (3)
- Redundancy Power Supply (1)
- CP20 Redundancy Power Supply (4)
- Diode redundancy module (5)
- PIRD20 Supplementary Unit (1)
- Puls Penang Malaysia (12)
- MOSFET redundancy module (8)
- YR20 Supplementary Unit (2)
- YR40 Supplementary Unit (4)
- YR80 Supplementary Unit (2)
- Battery modules for DC-UPS (17)
- Battery module with battery (7)
- UZK12 Battery (7)
- Battery Module (3)
- Puls Battery Module (15)
- Battery module without battery (7)
- UZO Battery Module (2)
- UZO24 (2)
- Battery module extension with batteries (1)
- Accessories (19)
- Battery replacements for DC-UPS (4)
- Puls Accessories (18)
- Mounting brackets (12)
- Puls Mounting Brackets (2)
- Side mounting bracket (4)
- Wall / panel mount bracket (7)
- Puls Penang (3)
Product Description
The YR20.246 is a redundancy module for building redundant power supply systems. It is equipped with two input channels and one output. The two inputs are decoupled by MOSFET technology.
More Details...
Product Description
The YR20.242 is a redundancy module for building redundant power supply systems. It is equipped with two input channels and one output. The two inputs are decoupled by MOSFET technology. In addition to the YR20.242, the YR20.
More Details...
Product Description
The YR2.DIODE is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A.
More Details...
Product Description
The PIRD20.241 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 10A output current and one output, which can carry nominal currents up to 20A.
More Details...
Product Description
The MLY02.100 is a simple is a redundancy module, which can be used to build 1+1 and N+1 redundant system. It is equipped with two input channels, which can be connected to power supplies with up to 5A output current and one output, which can carry nominal currents up to 10A.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. First of all, high immunity to transients and power surges as well as low electromagnetic emission and Marine approvals with EMC Class B make the CP20.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20.241–R1/-R2 units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20.241–R1/-R2 units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20.241–R1/-R2 units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP10.241-Rx-xx units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size.
More Details...
Product Description
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP10.241-Rx-xx units are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small size.
More Details...
Product Description
These power-bus-bars are used to connect several PISA-B modules electrically together. The power-busbars distribute the 24V supply voltage of the PISA-B modules.
More Details...
Product Description
This protection module fulfills two basic functions. First it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used.
More Details...
Product Description
This protection module fulfills two basic functions. First it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used.
More Details...
Product Description
The UB40.241 is an uninterruptible power supply controller (DC-UPS controller), which is used in combination with a 24V power supply and an external 24V-battery pack to bridge power failures. When the power supply provides sufficient voltages, the DC-UPS controller charges the battery.
More Details...
Product Description
The UB20.241 uninterruptible power supply controller (DC-UPS) is used in addition with a 24V power supply and batteries to bridge power failures or voltage fluctuations. This configuration can prevent expensive downtimes, long restart cycles and loss of data.
More Details...
Product Description
The UB10.245 uninterruptible power supply (UPS) controller along with a standard 24V power supply and one 12V battery can bridge power failures or voltage fluctuations. This unit can supply and bridge both a 24V load as well as a 12V load at the same time. The 12V is generated by a DC/DC converter from the 24V output.
More Details...
Product Description
This uninterruptible power supply (UPS) controller UB10.241 is an addition to standard 24V power supplies to bridge power failures or voltage fluctuations. Expensive downtimes, long restart cycles and loss of data can be avoided.
More Details...
Product Description
The DIMENSION UC-Series are DC-UPS utilizing Electrochemical Double Layer Capacitor (EDLC), commonly known as Ultracapacitors or Supercapacitors, which are installed inside the DC-UPS. They can bridge power failures or voltage fluctuations and supply voltage to the DC 24V bus for a certain period, which allows for a safe shut-down of the system.
More Details...
Product Description
The DIMENSION UC-Series are DC-UPS utilizing Electrochemical Double Layer Capacitor (EDLC), commonly known as Ultracapacitors or Supercapacitors, which are installed inside the DC-UPS. They can bridge power failures or voltage fluctuations and supply voltage to the DC 24V bus for a certain period, which allows for a safe shut-down of the system.
More Details...
Product Description
This uninterruptible power supply (UPS) controller UBC10.241 with integrated battery is a compact addition to standard 24V power supplies to bridge power failures or voltage fluctuations. Expensive downtimes, long restart cycles and loss of data can be avoided.
More Details...
Product Description
This uninterruptible power supply (UPS) controller UBC10.241 with integrated battery is a compact addition to standard 24V power supplies to bridge power failures or voltage fluctuations. Expensive downtimes, long restart cycles and loss of data can be avoided.
More Details...
Product Description
The UF40 buffer module is a supplementary device for regulated DC 24V power supplies, which can be used for various purposes:
- Deliver DC-power to bridge failures of the DC voltage supply system.
- Extend the hold-up time after loss of the AC power.
- Deliver extra short-term peak current above the current rating of the power supply.
More Details...
Product Description
The UF20 buffer module is a supplementary device for regulated DC 48V power supplies, which can be used for various purposes:
- Deliver DC-power to bridge failures of the DC voltage supply system.
- Extend the hold-up time after loss of the AC power.
- Deliver extra short-term peak current above the current rating of the power supply.
More Details...
Product Description
The UF20 buffer module is a supplementary device for regulated DC 24V power supplies, which can be used for various purposes:
- Deliver DC-power to bridge failures of the DC voltage supply system.
- Extend the hold-up time after loss of the AC power.
- Deliver extra short-term peak current above the current rating of the power supply.
More Details...
- Buffering for 24V loads
- Minimum hold-up time: 0.2s/20A (max. buffer time depends on load)
- Fit for industrial use: Energy storage in electrolytic caps., no accumulators
- Clear status indication by Status LED and signalling terminals
Product Description
The FPT500 is an industrial grade power supply for the 3-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.
More Details...
Product Description
The FPT500 is an industrial grade power supply for the 3-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.
More Details...
Product Description
The FPT500 is an industrial grade power supply for the 3-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection. It provides two to four stabilized outputs that are galvanically separated from the input. The negative potential of the outputs is permanently connected to PE within the unit.
More Details...
Product Description
The FPT500 is an industrial grade power supply for the 3-phase mains system, it is incorporated into a rugged wall-mount housing with an IP65/67 degree of protection.
More Details...